Small, light, long battery life

4 motors accurate core alignment

250 times magnification of fiber cores

7s fast splicing, 26s intelligent heating

More than 4000 times electrodes discharging

4400mAh Li-battery, 220 cycles splicing and heating

Inductive automatic heater, not heating without fibers

3 in 1 multi-function clamps, new waterproof structure

Apply to bare fibers, drop cables and jumper wires splicing


Applicable fiberSM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Diameter of cladding80-150um
Diameter of coating160-900um
Typical splice lossSM:0.02dB, MM:0.01dB, DS:0.04dB, NZDS:0.04dB
Return loss>60db
Fiber cleaved length10-16mm (coating diameter< 250um ), 16mm(coating diameter: 250-1000um )
Splicing program40 groups
Operate modeManual, Automatic
Auto-heatingAvailable
Typical splicing time7seconds
Tube heating time26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification250X(X or Y view), 125X(X and Y view)
Viewing method and display2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result4000 results
Loss evaluationAvailable
Tension test1.8-2.2N
InterfaceGUI menu interface, easier operation
Battery capacity4400mAh Li-battery, typical 220 cycles(splice and tube heat)
Power supplyAdaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode lifeMore than 4000 ARC discharges, can be replaced conveniently
TerminalsUSB 2.0 port, for uploading splice results and upgrading software
Operating conditionAltitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s
Dimension200mm(L)x123mm(W)x95mm(H)
Weight1.6kg including battery





Download datasheet

Write a review

Note: HTML is not translated!
    Bad           Good

Fusion Splicer OR-300B

  • Product Code: OR-300B
Minta Penawaran

Tags: OREN, Fusion, Splicer, OR-300B