• WORK ITALIA WIS20-35 - Short circuiting and earthing equipment for MV overhead bare conductors with screw clamps type SNAP-ON

WIS20-35 - Short circuiting and earthing equipment for MV overhead bare conductors with screw clamps type SNAP-ON

Description

Equipment contents

  • 3 aluminium alloy line end clamps type S20 (SNAP ON). Blocking system moved by steel screw. Bayonet tang type DIN for connection to the operating rod. Clamping capacity: round conductors Ø 3÷30 mm. The line clamp, for connection with the middle phase, is provided with two lateral branches supporting the two others line end clamps.
  • 2 Short circuit extraflexible electrolytic copper cables covered by transparent sheath, section 35 mm², length 2.5 m.
  • Ground extraflexible electrolytic copper cable covered by transparent rubber sheath, section 16 mm², length 16 m.
  • Press forged brass earth clamp, clamping capacity up to 33 mm, type MT33.
  • High insulating rod type PE2/300DIN made of epoxy resin reinforced by fiberglass tube, certified IEC 61235. Total length 3 m in two elements each length 1,5 m with DIN bayonet attack.

Alternative versions

WIS20-25

Cables section 25 mm²

CEI EN 61230

ICC 7.25 kA / 1 s

WIS20-55

Cables section 35 mm²

CEI EN 61230

ICC 12.4 kA / 1 s


Download Datasheet

Write a review

Note: HTML is not translated!
    Bad           Good

WORK ITALIA WIS20-35 - Short circuiting and earthing equipment for MV overhead bare conductors with screw clamps type SNAP-ON

  • Product Code: WIS20-35
Minta Penawaran

Related Products

WORK ITALIA WI-MT - Earthing equipment to connect to the short circuiting equipments on LV insulated conductors

WORK ITALIA WI-MT - Earthing equipment to connect to the short circuiting equipments on LV insulated conductors

WI-MT - Earthing equipment to connect to the short circuiting equipments on LV insulated conductorsD..

WORK ITALIA WI332/35 - Short circuiting and grounding equipment for MV overhead bare conductors

WORK ITALIA WI332/35 - Short circuiting and grounding equipment for MV overhead bare conductors

WI332/35 - Short circuiting and grounding equipment for MV overhead bare conductorsDescription Equ..

WORK ITALIA WI535-70 - Dispositivo di messa a terra ed in corto circuito per cabine e stazioni elettriche MT con pinze di contatto universali

WORK ITALIA WI535-70 - Dispositivo di messa a terra ed in corto circuito per cabine e stazioni elettriche MT con pinze di contatto universali

WI535-70 - Dispositivo di messa a terra ed in corto circuito per cabine e stazioni elettriche MT con..

WORK ITALIA WIDTSE-400 - Short circuiting and grounding equipment for disconnectable terminals and derivations with contact plug 400 A

WORK ITALIA WIDTSE-400 - Short circuiting and grounding equipment for disconnectable terminals and derivations with contact plug 400 A

WIDTSE-400 - Short circuiting and grounding equipment for disconnectable terminals and derivations w..

WORK ITALIA WINEV-MT411 - Short circuiting and grounding equipment NEVERS type, for MV overhead lines on bare conductors

WORK ITALIA WINEV-MT411 - Short circuiting and grounding equipment NEVERS type, for MV overhead lines on bare conductors

WINEV-MT411 - Short circuiting and grounding equipment NEVERS type, for MV overhead lines on bare co..

WORK ITALIA WTM-20 - Portable equipment for grounding operations on overhead LV, MV lines during stringing works

WORK ITALIA WTM-20 - Portable equipment for grounding operations on overhead LV, MV lines during stringing works

WTM-20 - Portable equipment for grounding operations on overhead LV, MV lines during stringing works..