The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary for vehicle and next generation equipment evaluation and development. Improve testing productivity and efficiency by eliminating the need to peel away cable insulation or use a sub-harness that is traditionally required to obtain signals. Key Features • Acquire CAN data immediately, simply by hooking probes to the cables • Eliminate concerns by using non-contact sensing technology • Use in a diverse array of development and evaluation applications that demand reliability
Basic specifications
| Detection method | Capacitive-coupled signal detection *No bare-wire connections |
|---|---|
| Detectable cables | AVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in) |
| Number of channels | 2 (SP7100) |
| Compatible communications speeds | SP7001, SP7002: CAN 125 kbit/s to 1 Mbit/s SP7001: CAN FD 125 kbit/s to 3 Mbit/s |
| Total delay time | 130 ns (typical) |
| CAN terminal resistance | 60 Ω (typical), built-in |
| Signal output connector | D-sub 9-pin female (CH1, CH2) |
| Operating temperature, humidity | Temperature: -40 °C to 85 °C (-40 °F to 185 °F) Humidity: -40 °C to 60 °C (-40 °F to 140 °F), 80% RH or less (with no condensation), 60 °C to 85 °C (140 °F to 185 °F), 60% RH or less (with no condensation) |
| Power supply | (1) AC Adapter Z1008 (100 V to 240 V AC), rated power: 8 VA (including AC adapter) (2) External power supply (10 V to 30 V DC), rated power: 3 VA |
| Dimensions and mass | SP7001, SP7002: 44 mm (1.73 in) W × 85 mm (3.35 in) H × 20 mm (0.79 in) D, 180 g (6.3 oz), Cable length: 2.5 m (8.20 ft) SP7100: 55 mm (2.17 in) W × 120 mm (4.72 in) H × 25 mm (0.98 in) D, 130 g (4.6 oz), Cable length: 0.3 m (0.98 ft) SP9200: Probe: φ 11.6 mm (0.46 in) × 33.7 mm (1.33 in) H, Guard hook: φ 5 mm (0.20 in) × 11.8 mm (0.46 in) H, 26 g, Cable length: 0.5 m (1.64 ft) |
| Accessories (SP7001, SP7002) | Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1 |
| Accessories (SP7100) | Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1 |
HIOKI SP7001, SP7002 NON-CONTACT CAN SENSOR
- Brand: HIOKI
- Product Code: SP7001, SP7002
- Availability: Pre-Order
-
Rp.0.00
- Ex Tax: Rp.0.00
Notice: Undefined index: button_position in /home/u7567509/public_html/system/storage/modification/catalog/view/theme/default/template/product/product.tpl on line 337
Related Products
HIOKI SP3000 NON-CONTACT AC VOLTAGE PROBE
The SP3000 is a non-contact AC voltage waveform probe ideal for maintenance applications involv..
Rp.0.00 Ex Tax: Rp.0.00
HIOKI U8793 ARBITRARY WAVEFORM GENERATOR UNIT
The Arbitrary Waveform Generator Unit U8793 is a plug-and-play module for the Hioki Memory HiCorder ..
Rp.0.00 Ex Tax: Rp.0.00
HIOKI P9000 DIFFERENTIAL PROBE
• Compact probe for CAT III 1000V environments • Wave mode: Observe instantaneous waveforms • RMS ..
Rp.0.00 Ex Tax: Rp.0.00
HIOKI MR9321-01 LOGIC PROBE
• 4 isolated channels • ON/OFF detection of 100V/200V AC voltage, or 24V DC • Detect of voltage in..
Rp.0.00 Ex Tax: Rp.0.00
