GL2000 is equipped with an isolated input mechanism to protect signals from interferences caused by noise from other channels. 16-bit A/D converter adopted to achieve hi-speed and hi-resolution measurement.
SIMULTANEOUS SAMPLING
GL2000 utilizes simultaneous sampling to eliminate slowdown in sampling rate by using multiple A/D converters in simultaneous sampling method. Four individual A/D converters in each channel sustains the maximum sampling speed for all four channels to measure high speed rapid voltage fluctuation and multi-channel vibration measurement.
Sampling interval: 1 µs to 1 min (in steps of 1, 2, 5)
EXTERNAL SAMPLING FUNCTION
Sampling of the logger is performed in sync with an external device using an external signal input.
Maximum input frequency: 100 kHz
* B-513 Input/Output cable for GL is required.
ALARM FUNCTION & SIGNAL OUTPUT
Threshold of an alarm can be set for each channel. When an alarm occurs, notification is sent by following methods.
ALARM THRESHOLD
Analog input: High, Low, Window-in, Window-out
Logic input: H or L (signal in each channel)
Pulse input: High or Rising, Low or Falling, Window-in, Window-out
WHEN ALARM IS DETECTED
- Display to screen (Digital value of alarm's origin channel is displayed in red)
- Save alarm information to measurement data file
- Output alarm signal
Number of channel: 4 channels (Output channel can be arranged to each source channel in OR condition.)
Signal type: Open collector (pull-up to 5 V with 10 kΩ resistor), maximum load is the 24 V and 100 mA.
* Requires Input/Output cable for GL series (B-513 Option). Approximate recording time
■ 4 channels of analog input. ■ Data is saved as a GBD file.Memory type Data
capacity1MS/s
(1μs)100kS/s
(10μs)1kS/s
(1ms)1S/s
(1s)Built-in RAM 4 M samples/ch 4 seconds 40 seconds 66 minutes 46 days Built-in Flash memory 3.9 GB N/A N/A 3 days 19 hrs. Over 1 year External memory (SD/USB Flash memory)* 4 GB N/A N/A 4 days 3 hrs. Over 1 year ■ 4 channels of analog input with 4 channels of Pulse input. ■ Data is saved as a GBD file.
Memory type Data
capacity1MS/s
(1μs)100kS/s
(10μs)1kS/s
(1ms)1S/s
(1s)Built-in RAM 4 M samples/ch 4 seconds 40 seconds 66 minutes 46 days Built-in Flash memory 3.9 GB N/A N/A 1 days 12 hrs. Over 1 year External memory (SD/USB Flash memory)* 4 GB N/A N/A 1 days 15 hrs. Over 1 year * When using 8 GB or larger memory, the size of data file will be up to 4 GB. The Relay mode enables extended recording time.
- download datasheet

