• TPI 9041 Ultra II Vibration Analyzer & Balancer

TPI 9041 Ultra II Vibration Analyzer & Balancer

The TPI Model 9041 Ultra II represents the very latest in easy to use high specification maintenance tools, offering extremely high levels of functionality and capability at a very affordable price!

As a high spec condition based monitoring (CBM) data collector and Dynamic 2 plane rotor balancer designed for plant and asset inspections, the Ultra II does it all.

  • Automatically detects out of balance, misalignment, looseness and bearing defects
  • Predictive analysis capabilities that accurately calculate time frame to failure
  • Condition based monitoring analyses bearing wear and gear degradation
  • Built-in single plane balancing enables correction of the most common cause of vibration. (Dual plane balancing with additional accelerometer)
  • Additional features include Inspection, Lube and remote/server database
  • User selectable defined envelope filters and demodulation functionality
  • True simultaneous 3 channel capture
  • High resolution (0.2Hz) frequency spectra from 2Hz to 10kHz
  • Rugged fully waterproof construction meets IP68 and MIL-STD-810F requirements
  • Includes C-Trend powerful and easy to use asset management and fault diagnosis software


Download datasheet

Technical
Aksesoris Model 9041 Ultra II Includes: Tachometer, accelerometer (one) and cables, tachometer mount adapter, and carrying case with shoulder strap
Spesifikasi Model 9041 Ultra II Specifications Size 8.7” x 3.7” x 1.8” (220 mm x 95mm x 45mm) Weight 1.1 lb (500g)(not including accelerometer) Environmental Water: MIL-STD-810F, Method 512.4 IP67 sealed against accidental immersing (1m for 30 min) Drop: MIL-STD-810F, Method 516.5, Procedure IV 26 drops from 1.22 m 6 additional drops at -4°F (-20°C) 6 additional drops at 140°F (60°C) Operating: -22° to 149°F (-30° to 65°C) Storage: -40° to 158°F (-40° to 70°C) Humidity: MIL-STD-810F, Method 507.4 Sand and Dust: IP67, Mil-STD-810F, Method 510.4, Procedures I and II Power supply Rechargeable battery (charger included) Battery life Typically 20 hours operating time depending on backlight usage. Frequency ranges 2 Hz to 1 kHz 2 Hz to 10 kHz Frequency Resolution Up to 0.02 Hz 400, 800, 1600, 3200, 6400,12800, 25,600 or 51,200 lines FFT Displayed Amplitude Units Acceleration in g Velocity in mm/s ( or inches/s) Bearing noise in BDU (bearing damage units) Displacement in Microns/Mils Displayed Frequency Units Hertz (Hz), RPM or CPM Dynamic range 96 dB +/- 50g to +/- 50g with standard accelerometer Auto set up of VA diagnostic bands (RPM = run speed) Instability, unbalance, misalignment & diagnostic bands looseness Envelope demodulation filters Fully user selectable high pass and low pass filter cut off frequencies IEPE accelerometer interface Constant current accelerometer power supply (+20 volts @ 2mA) can be switched off for use w/ BNC output control panels Supplied with BNC connection lead Numeric Keypad or Touch screen operation Stylus free collection of vibration data using numeric key pad or by touching screen Included accessories • Tachometer, accelerometer (one) and cables, tachometer mount adapter • Carrying case with shoulder strap

Write a review

Note: HTML is not translated!
    Bad           Good

TPI 9041 Ultra II Vibration Analyzer & Balancer

  • Product Code: 9041
  • Availability: Pre-Order
  • Rp.0.00

  • Ex Tax: Rp.0.00

Related Products

TPI 9070 Vibration Meter

TPI 9070 Vibration Meter

TPI Model 9070 adalah alat ukur vibrasi dengan satu tombol.Kondisi mesin secara umum dan kondisi bea..

Rp.0.00 Ex Tax: Rp.0.00

TPI 9071 Smart Vibration Meter

TPI 9071 Smart Vibration Meter

TPI 9071 adalah vibration meter yang dilengkapi ekstention kabel BNC dengan magnet sehingga simpel, ..

Rp.0.00 Ex Tax: Rp.0.00

TPI 9080 Vibration Analyzer

TPI 9080 Vibration Analyzer

TPI 9080 adalah vibration meter yang dilengkapi ekstention kabel BNC dengan magnet sehingga simpel, ..

Rp.0.00 Ex Tax: Rp.0.00

Tags: TPI9041, VIBRATION, tester, analyzer