• HIOKI U8793 ARBITRARY WAVEFORM GENERATOR UNIT

The Arbitrary Waveform Generator Unit U8793 is a plug-and-play module for the Hioki Memory HiCorder to create a function generator, arbitrary waveform generator, and waveform measurement in a single device.   Easily observe waveforms while varying test conditions, such as changing the signal's amplitude and frequency as well as programming various waveforms to output in order. Key Features • Output arbitrary waveform signals up to 2 channels • Output problematic waveforms recorded with the Memory HiCorder up to 15 V • Output customized arbitrary waveforms signals up to 15 V • For use with Hioki Memory HiCorder series (cannot use with 8847 or MR8847) • Built-in function generator and sweep function • Isolated between unit and output, and between all channels

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Output terminalNumber of channels: 2, SMB terminal (Output impedance: 1 Ω or less)
Max. rated voltage to ground: 33 V rms AC or 70 V DC
Output voltage range-10 V to 15 V (Amplitude setting range: 0 V to 20 V p-p, Setting resolution: 1 mV)
Max. output current10 mA (Allowable load resistance: 1.5 kΩ or more)
Function generatorDC, Sine wave, Square wave, Pulse wave, Triangular wave, Ramp wave, Output frequency: 0 Hz to 100 kHz
Arbitrary waveform generator modeWaveforms measured by MR8847A, etc., generated by Hioki Model 7075, PW3198, or SF8000, CSV waveforms
D/A refresh rate: 2 MHz (using 16-bit D/A)
Sweep functionFrequency, Amplitude, Offset, Duty (Pulse only)
Program functionMax. 128 steps (Number of loops for each step, Number of total loops)
OtherSelf-test function (Voltage), External input/output control
Dimensions and mass106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 250 g (8.8 oz)
AccessoriesNone



Download Datasheet

Write a review

Note: HTML is not translated!
    Bad           Good

HIOKI U8793 ARBITRARY WAVEFORM GENERATOR UNIT

  • Brand: HIOKI
  • Product Code: U8793
Minta Penawaran

Related Products

HIOKI SP7001, SP7002 NON-CONTACT CAN SENSOR

HIOKI SP7001, SP7002 NON-CONTACT CAN SENSOR

The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accuratel..

HIOKI U8794 VIR GENERATOR UNIT

HIOKI U8794 VIR GENERATOR UNIT

Key Features • As an inspection device of the ECU, it is ideal for generating simulation signals of..

HIOKI SP3000 NON-CONTACT AC VOLTAGE PROBE

HIOKI SP3000 NON-CONTACT AC VOLTAGE PROBE

The SP3000 is a non-contact AC voltage waveform probe ideal for maintenance applications involv..

HIOKI P9000 DIFFERENTIAL PROBE

HIOKI P9000 DIFFERENTIAL PROBE

• Compact probe for CAT III 1000V environments • Wave mode: Observe instantaneous waveforms • RMS ..

HIOKI MR9321-01 LOGIC PROBE

HIOKI MR9321-01 LOGIC PROBE

• 4 isolated channels • ON/OFF detection of 100V/200V AC voltage, or 24V DC • Detect of voltage in..

Tags: HIOKI, U8793