P-TRITON-P logger is completely waterproof for flood protection and battery powered with a typical battery life of 10 years.

Triton range of data loggers use a new data logging architecture that allows the user to monitor pressure/flow inputs in terms of average values based on typical 15 minute logging rate plus minimum/ maximum values based on fast sample rates.

Triton range of loggers store data in non-volatile memory organised into data files.  Each data file is an independent data logger with its own sample and logging rate.  More than one data file can record different types of data for the same input channel. Different types of data include Average, Instantaneous, Minimum, Maximum etc.

Pressure measurement accuracy is optimised by using multi point calibration. Logged data can be re-calibrated any time by re-calibrating the pressure transducer to the logger.

Applications

Triton – P data logger can be used for many water applications, including:

• Pressure/PRV monitoring
• Critical point monitoring
• Zone pressure monitoring
• Monitor weirs, reservoirs, borehole depth

Specification

TRITON logger can accept analogue inputs from transducers including:

• Pressure transducers: 20 bar standard, up to 40 bar max
• Options: Current input: 0-10mA, 4 – 20mA or Voltage input: 0-1, 0 – 10V
• Memory: 1 M Bytes organised into 8 separate data files of 60,000 reading each. Block or Cyclic – Start/Stop
• Memory Type: Flash non-volatile memory. Data is retained for 10 years if battery power fails.
• Logging Rate: 1 second to 24 hours
• Logged data types: Average, Instantaneous, Minimum, Maximum
• Communications: IrDA – Baud Rate of 115,200 Baud
• Case Dimensions: 87mm x 57mm x 40mm
• Construction: Plastic potted (IP68 submersible)
• Weight: 250g
• Operating temperature: -20 to + 70 degree Celsius (-5 to + 160 degree F)

Download Datasheet